Bengaluru Map
I 3D printed map area (roughly around or less than 1km2) around my workplace in Bengaluru.
Thanks to Smoggy3D for building https://map2model.com/.
Choice of colors is not the best but I wanted to try out the filaments that I got from Bambu Lab when I had purchased my printer. Those free/complimentary ones are I think around 150-200gms and this print was small enough to try one of those (the orange one) out.
I could see some stringing with the orange Bambu Lab filament that I freshly opened for this print. I don’t have a filament dryer that I could’ve used before using the filament fresh out of packaging and Bengaluru’s weather doesn’t help either (doesn’t help 3D printing but for people, you can’t complain at all, it’s quite nice). Before changing the dessicant in the AMS, I saw my hygrometer say 50%, so it’s not really good for the filaments and for prints like these that has items spaced closed together and susceptible to stringing.
Timelapse
This took me 8 hours to print.
Print timelapse